6” Encapsulated High Temp 90 ⁰C Submersible Motor

6CT-submersible-motor-encapsulated-6-inch-High-Temp-90-ww-316SS-franklin-electric.psd

6” Encapsulated High Temp 90 ⁰C Submersible Motor

Encapsulated motor for reliable operation at ambient temperatures up to 90 °C

Ratings: 3.7 - 30 kW

Features & Benefits

Encapsulated motor for reliable operation at ambient temperatures up to 90 °C

  • High temperature leads
  • Double-flange NEMA mounting design
  • Water lubricated thrust and radial bearings enable maintenance-free operation.
  • Increased thrust capacity up to 30 °C
  • Stainless steel splined shaft
  • StatorShield™ - Franklin encapsulation system: Franklin Electric encapsulated motors are equipped with hermetically-sealed windings. The stator resin mechanically supports the winding and provides fast heat dissipation.
  • Factory filled with FES Franklin’s non-toxic water soluble fill solution
  • Field replaceable lead using Franklin’s exclusive Water Bloc technolog
  • Pressure-equalizing diaphragm, spring pre-loaded
  • SandFighter™ sealing system with SIC mechanical seal and sand slinger
  • Standard motor: WW- Water well design (stator: 304SS / castings: CI powder coated)

Specifications

  • Ratings: 3.7 - 30 kW
  • Thrust load: 15.5 kN: 4 - 15 kW | 27.5 kN: 18.5 kW | 45 kN: 22-30 kW
  • Max. storage temperature: -15°C - +60°C
  • Nominal ambient temperature: 90 °C (with 0.16 m/s cooling flow)
  • No cooling flow in larger wells 12" and open reservoirs.
  • Standard voltage: 380-415 V (50 Hz) | 460 V (60 Hz)
  • Voltage tolerance UN: -10% / +6% [380-415V = (380-10%) – (415+6%)] (50 Hz) / ±10 % (60 Hz)
  • Protection requirements: DIN/EN 61947-4-1
  • Protection IP68
  • Insulation class F
  • Frequency of starts: 20 starts/ hour (with min. 3 minutes resting time), equally distributed
  • DOL / YΔ-start (pos. of cables 90 °)
  • All motors with factory installed leads
  • Installation orientation: Vertical / horizontal (shaft end heightened)
  • Rotation counter clock wise facing shaft end (rotation reversible for 3 phase motors)
  • Stand motor lead: 5 m 3 x 8.4 mm² and 5 m single conductor ground wire round cable mounted on the motor

Options

  • Higher-graded material: 316SS
  • Special voltages
  • 45 kN High Thrust version 7 (Standard in 22 kW and 30 kW)
  • Special lead lengths 8 m

Order Info

Accessories