6” Rewindable Standard Submersible Motor

6REW-submersible-motor-rewindable-6-inch-304SS-316SS-904L-cut-franklin-electric.psd

6” Rewindable Standard Submersible Motor

Features & Benefits

Best class winding wires in rewindable motors

The rewindable motors are equipped with best class winding wires. The windings can easily be replaced. The Franklin motors are factory filled with Franklin’s FES non-toxic water soluble
fill solution.

SandFighter™ sealing system with SIC mechanical seal and sand slinger

Hydrodynamic liquid lubricated radial bearings and High capacity Kingsbury type thrust bearing for 100 % maintenance free operation

  • Pressure-equalizing diaphragm, spring pre-loaded
  • NEMA mounting design with metric studs
  • Stainless steel splined shaft
  • Standard motor in 304SS
  • VFD operation up to a rated voltage of 400 V (in compliance with the application guidelines in the motor operating instructions and the VFD manufacturer). For VFD operation with higher voltages, please consult Franklin Electric.
  • Drinking water approvals

8/10/12 inch rewindable motors Franklin Electric

Specifications

  • Ratings: 4-37 kW
  • Thrust load: 15.5 kN: 4-26 kW; 27.5 kN: 30-37 kW
  • Max. storage temperature: - 15 °C to + 60 °C
  • Nominal ambient temperature: 50 °C
    • with 0.2 m/s cooling flow (4 - 15 kW)
    • with 0.5 m/s cooling flow (18.5 - 37 kW)
  • Standard voltage: 380 - 415 V (50 Hz), 460 V (60 Hz)
  • Voltage tolerance UN: 50 Hz: -10 % / +6 % UN [380 - 415 V = (380 - 10 %) – (415 + 6 %)] 60 Hz: ±10 % UN
  • Standard motor with PPC winding insulation (37 kW Standard with PE2/PA insulation)
  • Protection IP68
  • Protection requirements: DIN/EN 61947-4-1
  • Frequency of starts: 20 starts/ hour (with min. 3 minutes resting time), equally distributed
  • DOL / YΔ-start (pos. of cables 90 °)
  • All motors with factory installed leads (4 m)
  • Vertical and horizontal operation, shaftend heightend
    37 kW motors may not be installed in horizontal position (if required please
    contact Franklin Electric).
  • Rotation counter clock wise facing shaft end (rotation reversible for 3 phase motors)

Options

  • Higher-graded material: 316SS, 904L
  • Special voltages
  • Retrofitable PT 100 temperature sensor
  • Special lead lengths up to 50 m
  • Motors up to 30 kW with PE2/PA winding insulation (Standard cooling flows, 37 kW: max. 45 °C)

Order Info

Support materials

Assets

8/10/12 inch rewindable motors Franklin Electric

Accessories